AMC Digiflex Drive: DQ-BDC

DQ-BDC

NOTE: DQ-BDC Series drives are supported in MPI version 03.03.xx. If you are using an MPI version 03.04.06 and later, use the DPQ Series drives.

Drive FPGA Table

Node Type	Option	Valid FPGAs	Name
0x0001A001	0x00000000	0x00010011	AMC DigiFlex DQ111EE
0x0001A001	0x00000001	0x00010011	AMC DigiFlex DQ111SE-H
0x0001A001	0x00000002	0x00010011	AMC DigiFlex DQ111SS
0x0001A001	0x00000003	0x00010011	AMC DigiFlex DQ111SE
0x0001A001	0x00000004	0x00010011	AMC DigiFlex DQ113EE
0x0001A001	0x00000005	0x00010011	AMC DigiFlex DQ111RE
0x0001A001	0x00000006	0x00010011	AMC DigiFlex DQ115EE

Drive Monitor: Monitoring Real-time Data from Drive

Some data from the drive is not part of the standard MEI I/O. Although, it can be monitored in real-time from the drive. For more information on how to monitor real-time data from the drive, see Drive Monitor.

List of real-time monitor fields. This is a partial list of supported fields. Consult your drive manual for a complete list.

Bus Voltage
Demand Torque
Measured Torque
Drive Temperature
Analog Input 1
Analog Input 2

Drive Monitor Table

/* amc_digiflex.h */

/* 
 *  Drive Monitor Table
 */

typedef enum DIGIFLEXMonitorAddress {
    DIGIFLEXMonitorAddressNULL               =  0x0000,
    DIGIFLEXMonitorAddressBUS_VOLTAGE        =  0x1000,
    DIGIFLEXMonitorAddressDEMAND_TORQUE      =  0x1202,
    DIGIFLEXMonitorAddressMEASURED_TORQUE    =  0x1203,
    DIGIFLEXMonitorAddressDRIVE_TEMP         =  0x1C00,
    DIGIFLEXMonitorAddressANALOG_INPUT1      =  0x1E00,
    DIGIFLEXMonitorAddressANALOG_INPUT2      =  0x1E01,
    DIGIFLEXMonitorAddressANALOG_INPUT3      =  0x1E02,
    DIGIFLEXMonitorAddressANALOG_INPUT4      =  0x1E03
} DIGIFLEXMonitorAddress;