S200: Mounting the Drive

The S200 drives are designed for operation in a cabinet using the following installation instructions:

Mount the drives vertically inside a cabinet on a flat, solid, electrically conductive mounting surface that is connected to PE (Protective Earth Ground) and capable of supporting the weight of the unit.
Provide a good connection to PE. Remove the paint on the mounting surface over an area extending at least 12 mm (0.5 in) from the mounting bolts to achieve good electrical connection over a large area between the drive and grounded mounting surface.
Ensure that the environment within the cabinet meets the requirements listed in the Mechanical and Environmental Specifications.
See Mechanical Specifications for diagrams.

	AC Input Drives		DC Input Drives
	AC1, AC2 S20260-VTS S20360-VTS	AC3 S20660-XX	DC Base Drive S20330-VTS S20630-VTS	w/ Option S20330-XX S20630-XX
Drive Dimensions
Drive Height (A)	175.0 mm 6.90 in	175.0 mm 6.90 in	152.4 mm 6.00 in	152.4 mm 6.00 in
Drive Width (B)	54.8 mm 2.16 in	64.0 mm 2.52 in	28.7 mm 1.13 in	48.3 mm 1.90 in
Drive Depth¹ (C)	131.6 mm 5.18 in	131.6 mm 5.18 in	100.8 mm 3.97 in	100.8 mm 3.97 in
Clearance Requirements
Top and Bottom (D)	25.4 mm 1.0 in	25.4 mm 1.0 in	12.7 mm 0.50 in	12.7 mm 0.50 in
Side-to-Side (E)	25.4 mm 1.0 in	25.4 mm 1.0 in	12.7 mm 0.50 in	12.7 mm 0.50 in
Mounting Dimensions
Horizontal Mounting Offset (F)	25.6 mm 1.01 in	25.6 mm 1.01 in	24.6 mm 0.97 in	24.6 mm 0.97 in
Vertical Mounting Offset (G)	4.3 mm 0.17 in	4.3 mm 0.17 in	4.1 mm 0.16 in	4.1 mm 0.16 in
Vertical Mounting Height (H)	166.4 mm 6.55 in	166.4 mm 6.55 in	144.3 mm 5.68 in	144.3 mm 5.68 in
Drive-to-Drive Mounting (J)	80.3 mm 3.16 in	87.3 mm 3.44 in	41.40 mm 1.63 in	60.96 mm 2.40 in
Mounting Hardware	M4 or #8	M4 or #8	M4 or #8	M4 or #8
Drive Weight	0.77 kg 1.69 lb	0.85 kg 1.86 lb	0.40 kg 0.88 lb	0.5 kg 1.10 lb
¹ - Depth measurement is for drive only. Add approximately 50.8 mm (2 in) to accommodate mating connectors and wire bend radius.