After connecting to the eXMP via the Remote Desktop, you can change the eXMP’s IP address. From the Control Panel select Network Connections:
Right-click on Local Area Connection icon. Go to Properties > Internet Protocol > Properties. From this window you can configure the eXMP to use a dynamic or static IP address:
Dynamic IP Address:
Select "Obtain an IP address automatically."
Static IP Address:
Select "Use the following IP Address."
Then specify the IP address and Subnet mask.
When using a Dynamic IP Address, the eXMP will be addressed by its computer name (default = EXMP). See Changing the Computer Name.
After closing the Local Area Connection Properties window, Remote Desktop will lose its connection due to the new IP address. You will need to re-launch Remote Desktop with the new eXMP IP address.
