Select a Step ......................................................... Safety Warnings Introduction Host-side Remote Desktop Connection Setting Date and Time Changing Network Interface Settings System Properties Changing the Computer Name User Accounts File Transfer Using the eXMP-SynqNet Motion Controller Remote Debugging with MS Visual Studio eXMP Startup Files on the Compact Flash (CF) Host-side Console Configuration

eXMP-SynqNet QS Guide Windows XP Embedded

Setting Date and Time

If you receive the following error message, follow the directions below to set the Date and Time using Remote Desktop. If you do not know the IP address of the eXMP, see Setting the Date and Time using HyperTerminal.

When connected to the eXMP via the Remote Desktop Connection, you can adjust the eXMP's date and/or time. Right click on the clock located on the taskbar or go to Control Panel > Date and Time. Then configure the Date and Time properties:

Previous | Next