.

SLICE I/O Glossary

Baud Rate (Bit Rate) See CAN Bit Rate.
Calibration  
CANopen CANOpen is an international standard that defines how industrial equipment like I/O devices can communicate via a CAN network. For more information, see CAN in Automation website.
Channel Fault  
Channel Status LED  
Conversion Time  
Current Terminal  
Data Format  
Device Fault  
Diagnostic  
Diagnostic Function  
Dissolution  
EMC  
Expansion Module Status LED  
Expected Contact Life  
Field Power Contact Current  
Filtering Time  
Frequency Sweeps per Axis  
Initial Contact Resolution  
Input Channel  
Input Current Range  
Input Image Value  
Input Impedance  
Input Module Data  
Input Signal Delay  
Input Voltage  
Input Voltage Range  
Installation Position/Protection Class  
Isolation  
Load Resistance  
lsb Least significant bit
Minimum Load  
Module Error  
Module Scan Time  
MOSFET Metal Oxide Semiconductor Field Effect Transistor
Node  
OFF-State Leakage Current  
OFF-State Voltage  
ON-State Current  
ON-State Voltage  
ON-State Voltage Drop  
ON-State Voltage Range  
Output Voltage  
Output Current Rating  
Output Data  
Output Delay Time  
Output Diagnostic Status  
Output Image Value  
Output Module Data  
Output Signal Delay  
Output Voltage Range  
Over Current Limit  
Over Temperature Shutdown  
Parameterization Master  
PDO Process Data Object. A PDO is a CAN message that contains operational data. For example, an input node transmits PDO messages containing the state of the inputs.
Peak Short Circuit Current  
Photo Coupler Isolation  
Power Dissipation  
Protection  
Range Over  
Rated Load Voltage  
Relay Type  
Resolution  
Resolution in Ranges  
SDO Service Data Object. An SDO is a CAN message that is passed over the CAN network and is used to configure a Node.
Shock Non-operating  
Shock Operating  
Single Common  
Sink Terminal  
Slice A unit that connects to an adapter or other slices to make a node.
Source Terminal  
Surge Current  
Synq Error  
TC Input  
Thermocouple  
Voltage Clamp  
Voltage Terminal  

 

 

 

 

 

       Legal Notice  |  Tech Email  |  Feedback
      
Copyright ©
2001-2021 Motion Engineering