Controller.Number

Specifies the ID number of the motion controller card to use.

NOTE: The Init method must be called to connect to a motion controller after the properties Address, Number, Port, and/or Type have been changed.

The MEI device driver assigns unique numbers to each controller on a host machine. The first controller is numbered 0 and other controllers are numbered sequentially from this.

This property cannot be saved to flash memory.

Version History

Introduced in MPX 2.0.

Units

Seconds

Type

UInt32

Default

0.0

Visual Basic

Syntax

Property Number As UInt32

Sample Code

x = Controller.Number

Controller.Number = 1

Sample Application

C#