.

Axis.DriveParamReadSingle

DriveParamReadSingle returns the drive parameter specified by the index argument as a single-precision floating-point value.

SynqNet drives may have drive-specific parameters. These parameters are used to provide drive-specific information to the user or allow the user to change the drive configuration.

Examples of read-only drive parameters: amplifier power rating, amplifier temperature, motor capacity, motor serial number, encoder type, etc.

Examples of read/write drive parameters: maximum torque limit, maximum speed limit, gravity compensation, etc.

Note: DriveParamReadSingle does not validate whether the data type is supported by the drive parameter being read.  It is up to the user to choose the correct drive parameter method.  Please refer to your drive’s manual for information about what data types are supported by each drive parameter.

 

Version History

Introduced in MPX 2.0.

Result

Single

Arguments

 
Argument Type Description
index Int32 The index of the drive parameter being read.

Common Exceptions

 
Error Reason
AxisNotMappedToSqNode The axis object is not mapped to a SynqNet node.

 

Visual Basic

Syntax

Function DriveParamReadSingle(index As Int32) As Single

Sample Code

 
Dim x As Single = controller.Axis(0).DriveParamReadSingle(1) 


Sample Application

 

C#

Syntax

float DriveParamReadSingle(int index);

Sample Code

 
float x = controller.Axis[0].DriveParamReadSingle(1); 

 

See Also

MPX Drive Parameters Overview

 

       Legal Notice  |  Tech Email  |  Feedback
      
Copyright ©
2001-2021 Motion Engineering