CAN Firmware for SLICE I/O

IMPORTANT!
The appropriate CAN firmware must be downloaded to the CANopen controller if you are using the CANopen Network Adapter (TSIO-1002).
NOTE: This is different firmware than the firmware that is required for the standard (non-CANopen) controller.

If you are using the CANopen Network Adapter (TSIO-1002), CAN firmware version CAN002A5.out or newer must be installed on the controller.

The CAN firmware can be downloaded using Motion Console under the CAN Network Summary window.

The CAN firmware version can be found under the Version tab of the CAN Network Summary window.

Firmware Version: 002A6