Select a Step ......................................................... Safety Warnings Install MDK Software Install Controller Connect Hardware Motion Console - Download Controller Firmware - Add New Controller - Check Network Information - Check Node Information - Download Node FPGAs - Check Node Configuration - Map the Axes - Tune the Servo Control Loop - Move a Motor - Microsoft Visual C/C++

Quick Start Guide QMP-SynqNet Controller

Motion Console

Check Node Configuration

After the proper drive firmware is downloaded, click on the button to open the SqNode Summary window and verify that the proper number of drives were found.

This window provides the node configuration for each drive installed on the system. SynqNet finds the drives in the order that they are connected. The hardware setup used for this example had one drive.