.

Selection of the PHY

Although any PHY, meeting the requirements of IEEE 802.3-1998, should function correctly with any FPGA implementation of a SynqNet MAC, there are certain potential sources of incompatibility that must be carefully guarded against. These include:

 
  •  Poorly characterized portions of the MII timing.
  •  Use of non-standard registers via the SMI.

At this time, only two devices have been tested and recommended for SynqNet: Broadcom's BCM5221 and BCM5222.

 

 

       Legal Notice  |  Tech Email  |  Feedback
      
Copyright ©
2001-2021 Motion Engineering