mpiSqNodeDriveParamClear
Declaration
int32_t mpiSqNodeDriveParamClear(MPISqNode sqNode, int32_t driveIndex);
Required Header: stdmpi.h
Description
mpiSqNodeDriveParamClear clears the previously saved drive by loading the default set of drive parameters into the current and non-volatile storage on the drive. These drive parameters will be used each time this drive is subsequently started (after a power-on or network reset). The default drive parameters will take effect immediately.
NOTE: This function may not be supported by all drives. The default set of drive parameters may be different between different drive types and different drive manufactures.
| sqNode | a handle to a SynqNet node object |
|---|---|
| driveIndex | an index to the drive (0, 1, 2, etc), relative to the node. |
| Return Values | |
|---|---|
| MPIMessageOK | |