Temperature and Voltage Monitoring
eZMP-SynqNet Hardware > Operating Instructions
Overview
Temperature and voltage sensors in the eZMP are checked every 30 seconds by the 7-segment display's background service. If a high temperature or over voltage limit is detected, the background 7-segment display background service will flash the following output on the eZMP:
| 7-Segment Display Output (flashing) | Character Representation | Error Description |
|---|---|---|
 |
U. |
Over voltage limit detected. |
 |
H. |
High temperature limit detected. |
If a fault is encountered, the service does not continue its Service Sequence until the fault is cleared.
See Also
For more information on the 7-segment display operation, see 7-Segment Display.