SQIO-DIN32DOUT32: Power Requirements

24Vdc

The SQIO-DIN32DOUT32 does not draw current from the +24V and 24V_RTN rails. However, these rails are routed from J1 to J2 to permit other modules to use the 24V as a power source.
The SQID’s current consumption will be increased by a maximum of 50mA per SQIO-DIN32DOUT32.

+3.3Vdc

The SQIO-DIN32DOUT32 consumes a maximum of 220mA from the +3.3V rail. This is a worst-case figure based on operation at 6.25MHz with all outputs ON.