SQIO-ADC4DAC4: Power Requirements

24Vdc

The SQIO-ADC4DAC4 draws 70mA from the +24V and 24V_RTN rails. It will also increase loading of the +24V rail at the SQID by a further 30mA. The SQID’s current consumption will also be increased by 30mA on the +24V rail.

+3.3Vdc

The SQIO-ADC4DAC4 consumes approximately 120mA from the +3.3V rail. This is a worst-case figure based on operation at 6.25MHz.