S200: Safety Features
The S200 drive incorporates:
| |
- Output motor short circuit protection line-to-line, line-to-neutral, and line-to-PE.
- Internal monitoring of the power stage heat sink temperature for drive over-temperature.
- Bus over-voltage and under-voltage detection.
- Control under voltage detection.
- Excessive current I*t fault/foldback. Depending on drive setup, when excessive I*t is detected either the peak output current limit is dropped to 67% of maximum or the drive faults.
- Excessive motor current I2t protection.
- Invalid smart feedback device (SFD) shaft feedback signal.
- Motor over temperature on SFD equipped motors.
|
|
