.

Drive FPGA Table:
Yaskawa SGDS-xxx72A

Parameter Specification
Node Type
0x00020010
Option
0x00000001
FPGA
0xC0FE0019
Motor Count
1
Drive Count
1
Secondary Encoder Count
1
SqNode Digital Out Count
0
SqNode Digital In Count
0
SqNode Analog In Count
0
SqNode Analog Out Count
0

Motor 0

Capture, Probe, Pulse

Parameter Number
Capture Count 1
Probe Count 1
Pulse Count 0

Dedicated I/O

Parameter Supported?
Dedicated In 0 - Amp Fault Y
Dedicated In 1 - Brake Applied Y
Dedicated In 2 - Home Y
Dedicated In 3 - Limit HW Pos Y
Dedicated In 4 - Limit HW Neg Y
Dedicated In 5 - Index Primary Y
Dedicated In 6 - FeedbackFault Y
Dedicated In 7 - Captured N
Dedicated In 8 - Hall A Y
Dedicated In 9 - Hall B Y
Dedicated In 10 - Hall C Y
Dedicated In 11 - Amp Active Y
Dedicated In 12 - Index Secondary Y
Dedicated In 13 - Warning Y
Dedicated In 14 - Drive Status 9 Y
Dedicated In 15 - Drive Status 10 N
Dedicated Out 0 - Amp Enable Y
Dedicated Out 1 - Brake Release Y

General Purpose I/O

General Purpose
I/O Bit
Name Valid Configurations
6 USERIN-0 Input
7 USEROUT Output, Brake
8 USERIN-1 Input

 

 

       Legal Notice  |  Tech Email  |  Feedback
      
Copyright ©
2001-2010 Motion Engineering