.

XMP Motor I/O Cables

68-pin SCSI-2 cable for connecting MEI RMB-10V2's to STCs or Motor Test Stands. One required for every two axes.

CBL / .050
SCSI, 68 Pin

C001-0028  1m

Cable
Connector


Mating
Connector

 


15-pin µD to DB cable for connecting SynqNet controller I/O to STCs. For use with controllers having a µD-15.

CABLE, MicroD15(F)
- DB15(F), 3M

C001-0036  3m

Cable
Connector

Mating
Connector




15-pin DB to DE cable for connecting SynqNet controller I/O to STCs. For use with controllers having a DE-15 (VGA connector).

 

CABLE, HD15(M)
- DB15(F), 3M

C001-0037  3m

Cable
Connector

Mating
Connector




NOTE: This pinout is not a one-to-one relationship. It has been wired to match the DB15 pinout found on C001-0036. To see the actual pinout mapping, click here.

68-pin VHDCI to SCSI-2 cable for connecting XMP Analog controllers to STCs. One cable required for every two axes.

CBL-68 VHDCI, 1m
SCSI, 68 Pin

C001-0011  1m
C001-0013  3m

   

 

 

 

       Legal Notice  |  Tech Email  |  Feedback
      
Copyright ©
2001-2010 Motion Engineering